Feka VS are submersible pumps made entirely in stainless steel, ideal for lifting sewage water in residential building service and commercial building service. Microcast stainless steel vortex impeller or technopolymer impeller in back-flowing position to prevents pump clogging, it can handle solid matter up to 50 mm. High reliability guaranteed by the double mechanical seal in silicon carbide in oil bath. Feka VS is suitable for fixed or mobile installations and is available in the automatic version with integrated float switch or in the manual version without the float. Continuous duty asynchronous submersible motor, rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. 10 meter cable included. Feka VS is certified for lifting of waste water according to the EN 12050-2 standard. All versions have a handle.

Stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.

AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle. Microcast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side.

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. 

Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Number of poles: 2

Max starts/hour: 20